Of course, we can clear all faults. Our app sends the delete command to your control unit 100%. However, if the source of the error is a faulty or defective element, it has to be repaired first to clear the error code. You can also delete the errors if they are static, but since the cause is still present, the error will be entered again immediately after deletion or our app detects this directly and shows that the error is still present.
Please follow these steps:
- erase, disconnect and close the app
- Ignition/engine turned off and on again
- Now restart the app and reconnect
- Run a new diagnostic --> the error codes you get now are statically defined and have to be repaired!
The app has exactly the same quality, as if you would take your car to the dealership.
Note: If you have a lot of INFO fault codes, these are not active fault codes. INFO fault codes were real fault codes in the past that had been fixed. Often they are electronic faults in the communication of the respective control unit.